Crocodile Acrylic Bondcrete

April 29, 2018 admin 0 Comments

Acrylic Bonding Agent & High Strength Admixture

    • Enhanced cement hydration and bonding properties
    • Resistance to impact, moisture, and chemicals
    • Can be diluted with water 1-3 times
    • Apply primer before leveling floor
    • Enhanced flexural strength

7.5 liters / 50 kg cement, 0.33 liters / Sq m

Dimensions

1 liter, 3.75 liter, 20 liter

Compare

Description

Remove all loose, unsound, or contaminated concrete from area to be repaired. Roughen concrete surface. Pre-wet concrete and allow surface to dry before applying Crocodile Acrylic Boncrete. Use as an Admixture, Crocodile Acrylic Bondcrete can be used for patching applications.

Mix Crocodile Acrylic Bondcrete 1 liter with water 2 liters and Portland cement 5 kg and sand 13 kg.

Use as a Bonding agent

For Slurry Bond Coat: Mix Crocodile Acrylic Bondcrete 1 part with portland cement 1.5 parts is suggested to provide a creamy thick bonding slurry. Apply by brush or broom.
For Neat Bond Coat: Apply by brush or roller on the concrete. Wait until the bonding film is clear and dry to the touch before applying mortar or concrete. Curing Crocodile Acrylic Boncrete requires damp curing followed by drying in order to achieve full physical properties.

Leave a Reply:

Your email address will not be published. Required fields are marked *