Crocodile Admix Mold-W

April 29, 2018 admin 0 Comments

Mold Release Water Base

    • Suitable for steel, wood, or aluminum formwork
    • Unstained; leaves no residue on concrete and formwork
    • Can be diluted with water 4-8 times
    • After dilution, admixture will change to a white color
    • Can be painted on concrete
    • Superior release property; protects steel from rusting

1 liter / 20 – 60 Sq m


20 liters, 200 liters



Crocodile Admix Mold-W is a concentrate, low viscosity water base release agent for all type of Concrete formwork. It is a light amber liquid that will not stain. It reacts with cement paste at interface of the concrete and formwork to produce a thin layer coating of film enabling quick, clean and easy striking of formwork. It’s suitable for all type of formwork (Steel, Plastic, woods or aluminum) and concrete construction.

Surfaces of formwork should be clean; and free from oil grease or any contaminant. Apply by a low pressure spray, sponge mop, roller or brush before erecting the formwork. Concrete can be place soon after application of Crocodile Admix Mold-W or couple days later.

Coverage (After mix with water)
The coverage of Crocodile Admix Mold-W will vary depending on the type of formwork and its surface condition.
For wood formwork, 1 liter per 20-35 sq.m.
For steel and plastic formwork, 1 liter per
35-60 sq.m.


  • Do not inhale
  • For spray application, work in well-ventilated area
  • Should be used with the protection equipment such as gloves, dust mark and glasses.
  • If contact with skin or eyes, clean it with water. If irritation, immediately see a doctor
  • Keep out of reach of children

Leave a Reply:

Your email address will not be published. Required fields are marked *