Description
Crocodile Epoxy Plus for area where highly bond strength and chemical resistance are concerned
PREPARATION
- Clean and remove any dirt or contaminations remaining in the joints. Make sure the joints are clean and dry before grouting.
MIXING
- Mixing ratio Part A 1 bag: Part B 1 bag
- Mix the 2 components together and mix well by hand or low speed drill (<150 rpm).
- Stirred the mixture once again, before applying.
- The mixture should be used within 20-30 minutes.
PREPARATION
- Clean and remove any dirt or contaminations remaining in the joints. Make sure the joints are clean and dry before grouting.
Grouting Application
- Filling the joints with grout by using a rubber face trowel and working diagonally across the grout joints. As soon as possible, remove all excess grout with the trowel.
- Wait for 5-10 minutes, then use sponge to remove any remaining grout from the surface of the tile.
- Prevent the grout from dirt for at least 24 hours and clean again with warm water before use the area.
- Leave 7 days to ensure perfect stain resistance.
Limitations
- In case of grouting porous or rough-surface tile, test in an inconspicuous place first.
- Grouting only a small area (1 to 2 m²) at a time
- While cleaning Epoxy Plus from the surface of the tile, change sponge frequency
- Do not grouting in the area with temperature lower than 16°C
- Not appropriate for the area temperature exceeding 177°C
- Ready to fill water in the pool after applied 7 days