Light Blue Crocodile

April 25, 2018 admin 0 Comments

Cement Tile Adhesive
Enhanced durability and bonding strength

  • Great for ceramic tile installations with a maximum tile size of 60×60 cm
  • Excellent for residential or commercial projects
  • Suitable for interior use on floors and walls
Dimensions

20 kg

Colors
  • Grey
Compare

Description

Light-Blue Crocodile composed of Portland cement, special sand and polymer additives. Light-Blue Crocodile produces an excellent bond on ceramic tiles for interior floor and wall installation.

Preparation

  • All surfaces on which tile is to be set must be dry, structurally sound, free of all grease, oil, dirt, dust, curing compounds, sealers, coating, efflorescence, old adhesive residues, gypsum based underlayment and any other foreign matter.

Proportion of Mixing

  • Light-Blue Crocodile 20 kg (per bag) per 5.2-5.4 L of water or 2.5-3.0 parts of Light-Blue Crocodile per 1 part water by volume

Mixing

  • Mix Tile Adhesive with clean, potable water thoroughly until smooth with a mechanical mixer at a low speed (150 rpm).
  • Let mortar slakes for 15 minutes before mixing a second time.
  • Do not add water, latex, or additional powder after slaking period.

Application

  • Spread mortar with flat side of trowel to key-in substrate, and then apply additional mortar to ensure that it cover 100% at the back of tile.
  • During the setting of tiles, it is advised to occasionally remove a tile to be sure mortar has not skinned over and sufficient transfer is being made.
  • It is also required that tile be embedded to obtain good transfer of mortar to the tile and for proper alignment.
  • Do not adjust tiles in mortar after they have been set for longer than 15 minutes.

Curing and Grouting

  • A minimum cure is obtained in 24-48 hours, depending on ambient temperatures.
  • For better quality, Crocodile Grout should be chosen to suit each type of tiles. Crocodile Grout has many types and color for each joints and places

Suggestion

  • Grouting after tile installation at least 48 hours to achieve maximum efficiency

Limitations

  • Do not use tile adhesive with wood, asphalt, plastic coat or PVC, metal and mirror. (Do not allow frost within 72 hours)

Caution

  • May be harmful to the eyes, skin, or lungs. Wear suitable protective clothing, gloves, and eye/face protection
  • In case of contact with eyes, rinse immediately with water and seek medical advice
  • After contact with skin, wash immediately with water
  • Keep out of reach of children

Leave a Reply:

Your email address will not be published. Required fields are marked *